Our equipment

Analysis equipment
Cellulosic packaging | Pulp and paper
Decarborization | Bio-based products
Laboratory equipment
Pilot equipment

Coating unit

Versatile and flexible coating unit to meet the needs of the paper and packaging industry to improve their products or develop new ones. The unit allows the application of coating on a substrate by extrusion, gluing press or engraved roller. The pilot unit also allows the lamination of two substrates together.

General spec
Maximum speed (training)	360m/min.
Width of the substrate	400-660 mm
Substrate weight	40-300 g/m²
Maximum coil diameter	1000 mm
Internal core diameter	76,2 and 101,4 mm

Blade/Rod Coater

Gravure Coater

Manufacturer	Jagenberg/BMB
Model	Blade/Barflex
Coating Weight	4-20 g/m2
Maximum Solid Content	68 %
Viscosity	300-2000 cPs

Manufacturer	Jagenberg/BMB
Model	Variogravure
Coating Weight	7.5-10.5 g/m2
Maximum Solid Content	55 %
Maximum Viscosity	200 cPs
Applicator Roll line spacing	33 rows/cm @ 45°

Manufacturer	Danson
Model	Hartig
Adhesion Treatment	Corona (Pillar Corp.) 4.2 kVA
Chill Roll	597 mm dia./Matte Surface
Secondary Unwind Stand	457 mm roll on 76.2 mm Core

Manufacturer	Brampton Engineering
Model	350-30AC
Power – motor	75 kW
Power – heating	37.4 kW
Number of heating zones (barrel)	6
Number of heating zones (die)	3
Number of heating zones (die lip)	1
Die manufacturer	Egan “Series 32”
Slot width	760 mm
Screw diameter	89 mm
L/D Screw Ratio	30:1
Maximum Temperature	480°C
Extrusion Capacity (LDPE)	205 kg/h

Manufacturer	Coating Moisturizing System
Model	CM-203
Coating Weight	0.4-50 g/m2
Maximum Solid Content	65 %

Our equipment

Coating unit

Blade/Rod Coater

Technical specs

Gravure Coater

Technical specs

Coater/Laminator

Technical specs

Extruder

Technical specs

Moisturizing Unit

Technical specs

Infrared Dryer

Technical specs

Hot Air Dryer

Technical specs

On-line Measurement System

Technical specs

Supercalender

Technical specs

Conception web : Eklore Marketing

Manufacturer	Krieger
Energy Source	Natural gas
Number of Rows	4
Number of Emitters	5 per row
Power	32 kW/row

Manufacturer	BMB
Number of hoods	3
Maximum Air Temperature	190°C
Maximum Air Speed	50 m/s
Number of Nozzles	25 nozzles/hood

Manufacturer	Honeywell
Model	ProLine
Number of Scanners	2
On-line Measurements	Basis weight, moisture

Manufacturer	B.F. Perkins
Type	Off line
Number of nips	4
Steam shower	1
Maximum speed	183 m/min (600 pi/min)
Sheet maximum width	63.5 cm (25 po)
Sheet nominal width	61 cm (24 po)
Total load	4.5 – 14.5 tm
Linear pressure	72 – 233 kN/m (417 – 1300 pli)
Maximum roll diameter	50 cm (20 po)